China Manufacturer High Efficiency Dry Mortar Mix Plant
Dry powder mortar refers to a granular or powdery mixture of
aggregates (such as quartz sand), inorganic cementing materials
(such as cement), and additives (such as polymers) that have been
dried and screened in a certain proportion. , The materials can be
used directly after being transported to the construction site in
bags or bulk, and mixed with water. Dry mortar is used as a thin
layer to play the role of bonding, liner, protection and decoration
in the construction industry, and it is widely used in construction
and decoration projects.
Classification of dry mortar:
In the conventional sense, it is divided into two categories:
special and ordinary.
Common ones include masonry, plastering, ground mortar,
Specialty includes anti-cracking mortar, interface mortar, bonding
mortar, etc.
| Model | CM1200 | CM2000 | CM3000 | CM4500 | CM6000 | note |
| capacity(t/h) | 10-20 | 20-40 | 40-60 | 60-80 | 80-120 | |
| main machine | CMD1200 | CMD2000 | CMD3000 | CMD6000 | CMD4500 | |
| power(kW) | 30 | 37 | 55 | 75 | 110 | |
| high speed end | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | two-pole (7.5kW),four-pole(5.5kW)(optional) | |
| volume fraction of mixer | 70% | 70% | 70% | 70% | 70% | |
| aggregate size (mm) | 0~4.75 | 0~4.75 | 0~4.75 | 0~4.75 | 0~4.75 | |
| aggregate scale(kg) | (200~1300)±1% | (200~2200)±1% | (400~3000)±1% | (400~3800)±1% | (500-5800)±1% | adjustable according to client's requirement |
The non-gravity mixer barrel is equipped with dual-axis reverse
optional blades. The blades overlap and form a certain angle. The
rotation of the blades throws the material to the space flow layer,
causing instantaneous weight loss and falling into each other's
area. The materials are mixed back and forth, and the shaft moves
radially to achieve uniform mixing.
Has the following advantages:
1. Multi-angle cross mixing, leaving no dead corners
2. Dynamic manual sampling port for easy sampling
3. The blades are made of wear-resistant cast steel with long life
4. Double large door opening device, unloading quickly and cleanly.
Good dispersibility: the unique structural design inside the mixer
can effectively disperse polypropylene fibers and wood fibers,
completely solving the problems of segregation and fiber secondary
agglomeration caused by different specific gravity of materials
Wide range of application: This equipment can meet the production
needs of dry mortar with different performance requirements, such
as: masonry mortar, plastering mortar, mortar required for thermal
insulation system, decorative mortar and other dry mortars
High cost performance: For the production project of decorative
mortar for external wall insulation boxes, not only the investment
is low, the benefit is high, but the idle equipment and resource
waste caused by excessive investment are avoided
Simple and convenient to use: The equipment has a small floor area,
low energy consumption, easy operation, with an output of 3-8 tons
per hour and 3-6 workers.
The air box pulse bag filter has the following advantages:
1). The dust removal efficiency can reach 99.9%, and the dust
emission can be controlled below 30mg/Nm3.
2). Advanced sealing measures, the air leakage coefficient is less
than 2%. It can handle high-concentration dust below 100g/Nm3.
3). Advanced structural design, large filtration area per unit
volume, and small equipment volume.
4). The cleaning method is unique and effective, prolonging the
service life of the filter bag. The key parts are of reliable
quality and long service life.
5). Stable performance, high degree of automation, simple daily
maintenance and management.
